Filter
Top Products
Chapter 1 DVS-9000 Functions
142
Snapshots
a) Applicable only as temporary attributes, but not applicable by a menu operation.
b) Applicable only by a menu operation.
Attribute display
You can view the attributes of a snapshot in the Snapshot menu.
For more details, see “Snapshot Operations in the Menus” in Chapter 14
(Volume 2).
Temporary attributes
When recalling a snapshot, you can temporarily apply attributes distinct from
the attributes set for each register. These are called “temporary attributes.”
You can set temporary attributes when recalling a snapshot.
For details of snapshot operations, see Chapter 14 “Snapshots” (Volume 2).
Bus override
If you recall a snapshot while holding down an A or B bus button, the selection
of the signal on the A or B bus does not change when the snapshot is recalled.
This function is called “bus override.”
This function is effective when cross-point hold is off, and you want to
temporarily maintain the cross-point setting. When cross-point hold is on, the
above operation is not necessary.
Effect dissolve Yes Yes Yes
Auto transition Yes No No
GPI outputs
b)
Yes Yes No
Yes: Can be used No: Cannot be used
Attribute Region
M/E-1, M/E-2, M/E-3, and
PGM/PST
USER 1 to USER 8 DME 1 to DME 8