Filter
Top Products
357Frame Memory Operations
Chapter 7 Frame Memory
4
Press [Edit Enable], turning it on.
This enables the combining of the background signal (the signal providing
the background for combination) and the input signal (the signal providing
the foreground for combination).
5
To use a color matte signal for the input signal, press [Frgd Color], turning
it on.
Even when pair mode is enabled, you can make separate settings for each
FM.
6
Turn the knobs to adjust the following parameters.
7
If you turned [Frgd Color] off in step 5, if required press [Input Adjust] to
display the Input Adjust menu, and make the video process (see page 353)
and mask (see page 354) settings for the input signal.
Note
The input signal is lowered by one line, but when you apply a freeze, the
freeze image is returned to the correct position.
8
To set the background signal to black, press [Bkgd Black], turning it on.
Notes
• When the background signal is originally black, [Bkgd Black] remains
on.
• When the background signal is a freeze image (an image frozen, but not
saved), turning [Bkgd Black] on erases the unsaved freeze image and, as
a result, [Bkgd Black] remains on.
9
In the <Type> group, set the type of combination (see page 358).
10
In the state in which you want to freeze, press one of the following in the
<Freeze> group, to write the freeze image to temporary memory.
Frame: Freeze one frame.
Field: Freeze one field.
Off: Release the freeze, and delete the recorded freeze image.
After carrying out the freeze, to return to the state immediately before the
freeze, press [Undo] in the <Freeze> group.
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00