Filter
Top Products
319Basic Procedure for Wipe Settings
Chapter 5 Wipes
3
Set the following parameters.
a) See page 64.
Applying modulation to the wipe pattern (Modulation)
You can apply modulation independently to the main pattern and sub pattern.
Use the following procedure.
1
In the M/E-1>Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
2
Depending on the desired effect, in the <Modulation> group select one of
the following.
H: Modulate the pattern, applying waviness in the horizontal direction to
edges.
V: Modulate the pattern, applying waviness in the vertical direction to
edges.
Fringe: Modulate the pattern, applying waviness in the radial direction to
edges.
3
Set the following parameters.
.
a) See page 65.
b) See page 65.
Applying barrel or pincushion distortion to the edge of the wipe
pattern (Spring)
You can set the spring function independently for the main and sub patterns.
Use the following procedure.
Knob Parameter Adjustment Setting values
1 Width Width of the slits 1 to 128 (integer)
2 H Offset Spacing in the horizontal direction
−100.00 to +100.00
a)
3 V Offset Spacing in the vertical direction
−100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Amplitude Amplitude of modulation 0.00 to 100.00
2 Frequency Frequency of modulation 0.00 to 100.00
3 Speed Speed of waves
−100.00 to +100.00
a)
4 Shape Form of the modulation
1 to 3
b)