Filter
Top Products
Chapter 7 Frame Memory
360
Frame Memory Operations
a) See page 61.
To select the pattern, display the Pattern Select menu by pressing [Pattern
Select] button in the Pattern Adjust menu. You can change the pattern
selected in step 2 here. After selecting one of the patterns (standard wipe
patterns 1 to 24) displayed in the Pattern Select menu, you can adjust the
following parameters.
4
When you selected a pattern key or external key, if required press [Key
Invert] in the Edit>Composite menu to invert the key.
Image Output
There are two functions related to image output: the reposition function for
moving the output image, and the lock function for fixing the output image.
For an overview of the image output, see page 75.
Moving the output image (reposition function)
Use the following procedure.
1
In the Frame Memory menu, select VF3 ‘Reposition/Lock’ and HF1
‘Reposition.’
The Reposition menu appears. In this menu, you can also enable the V/K
mode (see page 352).
2
In the status area, select the FM output. (See page 351.)
3
In the <Reposition> group, select the movement mode (see page 75).
Normal: Move in normal mode.
Black&White: Move in black & white mode.
Knob Parameter Adjustment Setting values
1 Angle Angle of pattern rotation
−100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Size Pattern size 0.00 to 100.00
2 Soft Edge softness 0.00 to 100.00