Filter
Top Products
Chapter 5 Wipes
320
Basic Procedure for Wipe Settings
1
In the M/E-1 > Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
2
Press [Spring], turning it on.
3
Set the following parameters.
a) See page 66.
Applying a spiral effect to the wipe pattern (Spiral)
You can set the spiral function independently for the main and sub patterns.
Use the following procedure.
1
In the M/E-1 > Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
2
Press [Spiral], turning it on.
3
Set the following parameters.
a) See page 66.
Possible combinations of wipe patterns and modifiers
Yes: Can be used No: Cannot be used
Knob Parameter Adjustment Setting values
1 Gain Degree of barrel distortion
−100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Magnitude Size and direction of the spiral
−100.00 to +100.00
a)
2 Wave Speed Speed of the lateral waves
−100.00 to +100.00
a)
Modifiers Type of wipe
Standard Enhanced Rotary Mosaic Random/
diamond dust
Direction Ye s Ye s Ye s Ye s Yes
Split Ye s Ye s N o Ye s No
Edge Ye s Ye s Yes Ye s Ye s
Positioner
Ye s
a)
Ye s
b)
Ye s
c)
No No
Rotation Ye s Ye s
Ye s
c)
No No