Filter
Top Products
Chapter 7 Frame Memory
358
Frame Memory Operations
Note
All freeze images written to temporary memory are lost when the system
is powered off.
Saving a processed image
To save a processed image as a file, in the Edit>Composite menu use the
following procedure.
1
Press [Store].
The keyboard window appears.
The default file name, “image###” (where ### is a three-digit number) is
input.
2
In the keyboard window, enter the file name (maximum 8 characters).
3
In the keyboard window press the [Enter] button.
This saves the freeze image as a file in memory.
Selecting the way in which images are combined
To select the way in which the background image and input signal are
combined (see page 75), use the following procedure.
1
In the <Type> group of the Edit>Composite menu, select one of the
following methods of combination.
• Pattern Key: pattern key
• Ext Key: external key
(This can only be selected when the pair mode is enabled. The signal
selected on the frame memory source 2 bus is used as the key signal.)
•Mix: mix
•NAM: non-additive mix
If none of the above is selected, image combination is not carried out.
2
Depending on the selection in step 1, set the following parameters.
• When [Pattern Key] is selected
a) The patterns are the same as for a standard wipe. See the appendix “Wipe Pattern List”
(Volume 2).
Knob Parameter Adjustment Setting values
1 Size Size of pattern 0.00 to 100.00
2 Soft Edge softness of pattern 0.00 to 100.00
3 Pattern Pattern number
1 to 24
a)