Filter
Top Products
Chapter 5 Wipes
314
Basic Procedure for Wipe Settings
5
If you selected Pattern in step 4, if required, the following modifiers can
be added. After selecting a wipe mix, skip to step 6.
• When turning [Position] on and setting the pattern position
a) See page 61.
• When turning [Multi] on and using replications of the same pattern
a) See page 64.
• When turning [Aspect] on and setting the aspect ratio of the pattern
a) See page 63.
• When turning [Angle] on in the <Rotation> group and slanting the
pattern
a) See page 61.
• When turning [Speed] on in the <Rotation> group and rotating the
pattern at a constant rate
a) See page 62.
Knob Parameter Adjustment Setting values
1 Position H Horizontal position
−200.00 to +200.00
a)
2 Position V Vertical position
−200.00 to +200.00
a)
Knob Parameter Adjustment Setting values
1 H Multi Number of repetitions of pattern
horizontally
1 to 63
2 V Multi Number of repetitions of pattern
vertically
1 to 63
3 Invert Type Replication layout
1 to 4
a)
Knob Parameter Adjustment Setting values
1 Aspect Aspect ratio
−100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Angle Angle of pattern rotation
−100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Speed Rotation rate of pattern
−100.00 to +100.00
a)