Filter
Top Products
3-62 Sun Fire X4100 and Sun Fire X4200 Servers Service Manual • June 2006
FIGURE 3-58 Releasing a PCI Card Securing Latch
c. Pull the PCI card out of the PCI riser. Ensure that the PCI card’s rear connector
panel is released from the tab on the chassis rear panel.
6. Install a PCI card:
a. Working from the rear of the chassis, pivot the PCI card latch for the slot
upward. See
FIGURE 3-58.
b. If the PCI slot is empty, remove the filler panel from the server back panel
opening.
c. Ensure that a PCI card riser is inserted in the PCI card slots.
The server is shipped with a PCI card riser in each of the two PCI slots.
d. Insert the PCI card into the riser. Ensure that the PCI card's rear connector
panel engages the tab in the chassis rear panel.