Filter
Top Products
3-4 Sun Fire X4100 and Sun Fire X4200 Servers Service Manual • June 2006
3.2.3 Removing the Front Bezel
Remove the bezel from the front of the chassis by following these steps:
1. Open the fan bay door and use a No. 2 Phillips screwdriver to unfasten the
captive screw that locks the bezel in place. See
FIGURE 3-3.
2. Pull the bezel away from the chassis.
Note – Be careful to avoid bending the bezel by loosening it from the middle and
both end sockets simultaneously.
FIGURE 3-3 Unfastening the Front Bezel Locking Screw