Filter
Top Products
Chapter 4 Maintaining the Sun Fire X4200 Server 4-71
FIGURE 4-68 Disconnecting the Power Distribution Board From the Chassis
13. Slide the power distribution board toward the front of the chassis to release the
five chassis standoffs from the keyways in the board.
14. Lift the board up off of the chassis standoffs and remove it from the chassis.
FIGURE 4-69 Removing the Power Distribution Board
Installation is the reverse of this procedure.
Note – When you reinstall the power distribution board, ensure that the plastic air
baffles on the chassis are fully raised to provide clearance for the rear of the board.