Sun Microsystems X4100 Server User Manual


 
4-4 Sun Fire X4100 and Sun Fire X4200 Servers Service Manual June 2006
4.2.3 Removing the Front Bezel
Remove the bezel from the front of the chassis by following these steps.
1. Open the fan bay door and use a No. 2 Phillips screwdriver to unfasten the
captive screw that locks the bezel in place. See
FIGURE 4-3.
2. Pull the bezel away from the chassis.
Note Be careful to avoid bending the bezel by gradually pulling it from the
middle and both ends simultaneously.
FIGURE 4-3 Unfastening the Front Bezel Locking Screw