Chapter 4 Maintaining the Sun Fire X4200 Server 4-13
b. Twist the heatsink slightly to lift it off of the board. Turn the heatsink upside
down and allow the spring in each of the two mounting holes to fall out into
your hand.
Note – Set the heatsink upside down on a clean, flat surface to prevent the thermal
grease from contaminating other components.
c. Pull the CPU socket lever slightly away from the socket. See
FIGURE 4-10.
d. Pivot the lever up, into the fully open, vertical, position.
FIGURE 4-10 Releasing the CPU Socket Lever
e. Lift the CPU out of the socket, leaving the lever in the vertical, open position.
See
FIGURE 4-11.