Filter
Top Products
Chapter 3 Maintaining the Sun Fire X4100 Server 3-69
FIGURE 3-65 Disconnecting the Flex Cable’s Four Connectors
10. Use a No. 2 Phillips screwdriver to remove the three screws that secure the power
distribution board to the chassis and bus bars. See
FIGURE 3-66.
FIGURE 3-66 Unfastening the Power Distribution Board Screws
11. Raise the plastic air baffles that cover the power supply connectors up and toward
the rear of the chassis to provide clearance.
12. Slide the power distribution board toward the front of the chassis to release the
five chassis standoffs from the keyways in the board.