Filter
Top Products
Appendix E Serial Attached SCSI BIOS Configuration Utility E-29
TABLE E-10 PHY Properties Screen Field Descriptions
Field Description
PHY The PHY number for which this information applies.
SAS Port The associated SAS Port (0 to N), as configured on this adapter.
Link Status The PHY link status. Possible values are:
• Enabled, Unknown Link Rate
• PHY Disabled
• Enabled, negotiation failed
• Enabled, 1.5 Gbps
• Enabled, 3.0 Gbps
Discovery Status A 32-bit hexadecimal value indicating the discovery status for the
PHY or expander. Currently defined values are:
• Discovery Completed Successfully 0x00000000
• Loop Detected 0x00000001
• Unaddressable Device Exists 0x00000002
• Multiple Ports 0x00000004
• Expander Error 0x00000008
• SMP Timeout 0x00000010
• Out of Route Entries 0x00000020
• SMP Response Index Does Not Exist 0x00000040
• SMP Response Function Failed 0x00000080
• SMP CRC Error 0x00000100
Device Identifier The ASCII device identifier string extracted from the device’s
inquiry data.
Scan Order The scan order for this device. This is the equivalent of a SCSI ID for
parallel SCSI.
Device Information Indicates whether a device is SAS or SATA.
(SATA is not supported on Sun Fire X4100 and Sun Fire X4200
servers at this time.)
SAS Address The SAS address of this device.