Filter
Top Products
January 2000 © TOSHIBA TEC 1 - 3 FC-22 ADJUSTMENT
Classification
Error code
Content
Fuser unit related service call C41
Thermistor or heater abnormal when warming-up is started
C42 Thermistor abnormal after the copier becomes ready
C43 Thermistor abnormal during warming-up after abnormality
judgment
C44 Heater abnormal during warming-up after abnormality
judgment
C46 Heater abnormal (low temperature) after the copier has
become ready
C47 Rear thermistor abnormal after the copier has become
ready
C48 Heater abnormal (high temperature)
C7 Error C7
Communications related service call C57 Communications error between Main-CPU and Sorter-CPU
C5A
Communications error between Main-CPU and printer controller
C5B Main-CPU signal transmission error to IMC-CPU
C5C Main-CPU signal reception error from IMC-CPU
ADF related service call C72 Error of aligning sensor automatic adjustment
C73 EEPROM initializing error
C74 Error of paper exit sensor automatic adjustment
Other service calls C94 Main-CPU abnormal
C9A Main memory abnormal
C9E IMC board connection abnormal
Laser optical unit related service call
CA1 Polygonal motor rotation abnormal
CA2 H-SYNC abnormal
CD1 Laser calibration error (K)
CD2 Laser calibration error (C)
CD3 Laser calibration error (M)
CD4 Laser calibration error (Y)