Filter
Top Products
FC-22 ADJUSTMENT 1 - 58 January 2000 © TOSHIBA TEC
1.6.4 Scanner related adjustment
(a) Image distortion adjustment
Note: The screws on the rear side of the mirrors 1 and 3 must not be adjusted.
<Procedure>
Remove the original glass and the left top cover,
and then move the carriage 1 toward the paper
exit side until it stops. Insert a plus type screw-
driver into the hole of the indicator unit and ad-
just the screws, following the step 1 to step 2.
Step 1
In case of
A
:
Tighten the mirror-2 adjustment screw (CW).
→
Go to
C
In case of
B
:
Loosen the mirror-2 adjustment screw (CCW).
→
Go to
D
Image
A
B
D
Mirror-2
Feeding direction
Feeding direction
Step 1
Step 2
C