Filter
Top Products
FC-22 TROUBLESHOOTING 4 - 22 January 2000 © TOSHIBA TEC
C18 LCF tray function abnormal
Is the harness between the LGC board and the LCF unit open-circuited?
Is the relay connector of the harness between the LGC board and the LCF unit or the connector
J105 on the LGC board disconnected?
Reconnect the connector. Replace the harness.
Do the switches and sensors in the LCF unit function?
1. Replace the LCF tray motor.
2. Replace the LGC board.
1. Replace any faulty sensor or switch in the LCF unit.
2. Replace the LCF drive PC board or the LCF tray-down switch PC board.
3. Replace the LGC board.
NO
▼
YES
▼
NO
▼
YES
▼