Filter
Top Products
January 2000 © TOSHIBA TEC 1 - 59 FC-22 ADJUSTMENT
Step 2
In case of
C
:
Tighten the mirror-1 adjustment screw (CW).
→
Normal image
In case of
D
:
Loosen the mirror-1 adjustment screw (CCW).
→
Normal image
Note: After the image distortion adjustment, when
the adjustment screws of the mirror 1 and 2
are turned, lock the adjustment screws us-
ing the screw locking agent “BOND-1324”.
Mirror-1
[Application Method of the Adhesive for the
Screw Locking]
(1) Adjust the image distortion.
(2) Remove the original glass and the indicator unit.
(3) Move the carriage 1 toward the paper exit side.
(4) Apply the adhesive (BOND-1324) to the adjust-
ment screws of carriage 1 and 2.
Mirror
Note:
Application Method
*Apply good quantity of the adhesive to the “Ap-
plication area”.
*The adhesive needs 12 hours to harden com-
pletely.
(5) Confirm that there is no dust or stain on the mir-
ror 1, 2 or 3 or the shading correction plate.
(6) Install the indicator unit and the original glass.
Application area
Carriage frame