Filter
Top Products
January 2000 © TOSHIBA TEC 5 - 1 FC-22 FIRMWARE UPDATING
5. FIRMWARE UPDATING
5.1 [ 3 ][ 9 ] Mode Operation
5.1.1 Outline
Connect copier and PC with serial cable and turn the power on pressing 3 and 9 keys, the copier goes
into "Firmware Version Up Mode". Then you can update system software data and/or UI data through the
PC.
5.1.2 Preparation of PC
To update the firmware of copier, the following preparations are necessary.
(1) Software Installation
"Virtual modem" and "War FTP Daemon" have to be installed in your PC.
Please refer to "5.2 Installation Instructions for Firmware Update through PC"
And also, War FTP Daemon has to be "ONLINE" mode.