Filter
Top Products
FC-22 ADJUSTMENT 1 - 36 January 2000 © TOSHIBA TEC
Allowable
Operation
Code
Name Default
input value
Contents
procedure
group
1
1
1
1
1
1
1
1
1
1
1
1
418 0 0-16 Accumulated total of CE1, CE2, CE4
(Max.16)
* Enabled when ‘Image quality control 3
(08-401)’ is 1 (Enabled).
452 4 0-24 Setting time (hour) of Image quality con-
trol auto-start (ready)
453 300 0-999 Setting print volume (number of sheets) to
automatically start Image quality control
(continuous printing)
455 10 0-30 Setting print volume (x 100 sheets) to au-
tomatically start Image quality control (ac-
cumulated print volume)
480 Paper source priority 0 0-5 0: A4/LT 1: LCF 2: 1st cassette
3: 2nd cassette 4: 3rd cassette
5: 4th cassette
481 Automatic paper source change 1 0-1 0: OFF 1:Normal
When 1 is set, a paper source becomes
empty and the same size paper is present
in another source, the machine will auto-
matically switch to that source of paper.
485 0 0-1 Setting of pre-running rotation of polygo-
nal motor
0:
Low speed rotation (Pre-running rotation)
1: Stop
491
Out of specified paper size printing 0 0-1 0: Disabled
1: Enabled
505 Paper (plain paper, OHP, thick 1 0: Compatible paper not present;
paper). 1: Compatible paper present
Switched according to image
processing
507 Filter setting selection in Fiery 0 0-1 0: non-filter mode (OFF)
scanning 1: filter mode (ON)
558 Start setting of developer 1 0-1 0: Disabled
material counter image quality 1: Image quality control is started on
control each setting counter (08-559).
559 Start count setting of developer 100 0-999 Image quality control start count is set
material counter image quality when (08-558) is used
control
Abnormal detection counter K
(display/0 clearing)
Image quality control auto-start
time setting (ready)
Image quality control auto-start
print volume setting (continuous
printing)
Image quality control auto-start
print volume setting (accumu-
lated print volume)
Pre-running rotation of polygonal
motor