Filter
Top Products
FC-22 ADJUSTMENT 1 - 68 January 2000 © TOSHIBA TEC
1. 8 Density Adjustment
The center density and the density variation controlled by density adjustment keys can be adjusted
as follows.
Copy mode
Color
Text/photo Text
Printed
Photo Map
Items to be adjusted Remarks
mode image
550 551 552 553 554
560 561 562 563 564
570 571 572 573 574
580 581 582 583 584
555 556 557 558 559
565 566 567 568 569
575 576 577 578 579
585 586 587 588 589
Full color
The larger the value, the
darker the image becomes.
The larger the value, the darker
the “dark” side becomes.
The larger the value, the lighter
the “light” side becomes.
The larger the value, the
darker the image becomes.
The larger the value, the
darker the image becomes.
The larger the value, the darker
the “dark” side becomes.
The larger the value, the lighter
the “light” side becomes.
The larger the value, the
darker the image becomes.
Manual-density
center value
Manual-density
“dark” step value
Manual-density
“light” step value
Automatic density
Manual-density
center value
Manual-density
“dark” step value
Manual-density
“light” step value
Automatic density
Black
Make a test copy and compare the image obtained with the current settings; if necessary, make adjust-
ment using the following procedure.
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Input the code of required mode (color mode, copy mode, item to be adjusted) with digital keys and
press the [START] key.
(3) Input an adjustment value with digital keys (acceptable values: 0 to 255).
(To correct an input value, press the [CLEAR] key.)
(4) Press the [SET] icon or [INTERRUPT] key to store the value.
→
The copier goes back to the standby
state.
(5) Press the [ENERGY SAVER] key and then press the [START] key to make a test copy.
(6) If the desired image density has not been attained, repeat the steps (2) to (5).