Filter
Top Products
January 2000 © TOSHIBA TEC 1 - 37 - 1 FC-22 ADJUSTMENT
Allowable
Operation
Code
Name Default
input value
Contents
procedure
group
636 APS thick paper compatibility 0 0:Plain paper; 1: Thick paper; 1
2: Mixed
641 0 0-3 0: OFF 1: STAPLE 2: SORT 1
3: GROUP
642 0 0-3 0: NON SORT 1: STAPLE 2: SORT 1
3: GROUP
649 Monochrome copying when 1 0: Prohibited; 1: Allowed 1
empty of color toner
653
Machine administrator’s password
0000
0000-9999 1
655 Off-level setting for auto off-mode 0 0: Power shutoff; 1: Low power 1
656 Execution mode for self 0 0 – 255 0: Normal; 1: Pulse; 2:
γ
;1
diagnostic image processing 3: Scanner correction 8 color conversion;
16: Other
664 Switching of aging ADF operation 0 0: Single-side; 1: Both-side 1
668 All clearing of ID codes - 3
669 All clearing of image processing - 3
05 adjustment values
670 All clearing of halfway results - 3
of color conversion
671 All clearing of pulse width - 3
selection adjustment results
672 All clearing of
γ
correction - 3
table adjustment results
678 Mode memory initialization - 3
679 Weekly timer initialization - 3
681 Support for cascading exit 0~1 0: Invalid; 1: Valid 1
682 (Auto job start: Magazine-sort 0 0: Left-hand opening; 0
setting) 1: Right-hand opening
700 Fuser thermistor status counter 0 0-9 2: 2nd-time abnormality of thermistor/ 1
(C7 counter) heater at warming-up start
3: Unused 6: Thermistor abnormal after
“ready” is attained.
9: Heater abnormal after “ready” is
attained (high temp.)
712 Upper and lower fuser roller tem- 2 0-6 0: OFF 1: 60°C 2: 70°C 3: 80°C 1
perature for energy saver mode 4: 115°C 5: 125°C 6: 135°C
with priority aim of energy
saving
Automatic sorting mode priority
from the RADF
Sorter mode priority at power ON
(for AC)