Filter
Top Products
January 2000 © TOSHIBA TEC 5 - 15 FC-22 FIRMWARE UPDATING
5.2.3 Preparation of PC to use a network
(1) Setting Virtual Modem.
The connection between PC and copier is made using PPP(Point-to-Point Protocol). It is necessary
to use a dial-up networking, and use a virtual modem.
First, install the virtual modem. The virtual modem can be downloaded from the following web site.
URL: http://www.mindspring.com/
~
kewells/net/scripts.html
After download, set up the modem as follows.
Click "Start" button, point at "Settings", and then click "Control Panel".
Click on Modems.