Filter
Top Products
FC-22 FIRMWARE UPDATING 5 - 10 January 2000 © TOSHIBA TEC
Firmware Version Up Mode
Cannot connect with PC.
Failed to install a new firmware.
Power ON
Connection
Failure
Connected
Target area number
➝
➝
Target: 1
Target: 6
Target: #1
Change the number by pressing key
➝
➝
Firmware Version Up Mode
Target: 1
Program canceled.
1’ 1 2
Press START
Key
Press CLEAR
Key
2
Press CLEAR
Key
Power OFF
Firmware Version Up Mode
> Make a connection from PC.
Firmware Version Up Mode
Target: 1
Established serial connection with PC.
> Press START key to install new firm-
wares.
> Please select a target with DIGITAL
keys.
5.1.4 Screen details
The following screen will be displayed in [ 3 ][ 9 ] mode.
Press
digital key