Filter
Top Products
January 2000 © TOSHIBA TEC 1 - 13 FC-22 ADJUSTMENT
Digital key Icon Item Condition
1——
2 — Color registration sensor (front)
Sensor output value is displayed with 8 bit.
3 — Color registration sensor (rear)
Sensor output value is displayed with 8 bit.
4 — Image quality sensor
Sensor output value is displayed with 10 bit.
5——
A ADF aligning sensor 1: Original exist
B ADF exit sensor 1: Original exist
C ADF open/close sensor 1: ADF is open
6
D ADF empty sensor 1: Original exist
E ADF size sensor 1
F—
G ADF size sensor 2
H ADF unit is installed or not 1: ADF unit is installed
A—
B Direct control-panel connection detection
C Connection
7
D Installation
E—
F Carriage home position sensor 1: Carriage is home position
G Direct control-panel SW-F key (during debugging)
H Platen sensor 1: Platen cover is closed
A—
B—
C—
8
D APS sensor (APS-R) 1: Original exist
E APS sensor (APS-C) 1: Original exist
F APS sensor (APS-3) 1: Original exist
G APS sensor (APS-2) (for A4 series) 1: Original exist
H APS sensor (APS-1) 1: Original exist
9 — Scanner SCM board input 24V check Output value is displayed with 8 bit.
0 — Thermistor check
—
[FULL COLOR]key: OFF, [AUTO COLOR]key: ON, [ENERGY SAVER]key: ON