Filter
Top Products
FC-22 ADJUSTMENT 1 - 12 January 2000 © TOSHIBA TEC
Digital key Icon Item Condition
A—
B—
C—
5
D—
E—
F—
G—
H—
A—
B—
C—
6
D—
E—
F—
G Front cover, paper-exit unit open/close check 1: Cover/unit open
H
Polygonal motor rotation status (Motor is rotating by 03 Output mode)
0: Normal rotation
7——
8 — Upper fuser roller thermistor (center) check
Thermistor output value is displayed with 8 bit.
9 — Upper fuser roller thermistor (rear) check
Thermistor output value is displayed with 8 bit.
0 — Lower fuser roller thermistor (center) check
Thermistor output value is displayed with 8 bit.
Digital key Icon Item Condition
1 — Lower fuser roller thermistor (rear) check
Thermistor output value is displayed with 8 bit.
2 — Temperature sensor check
Sensor output value is displayed with 8 bit.
3 — Humidity sensor check
Sensor output value is displayed with 8 bit.
4 — Drum thermistor Y check
Thermistor output value is displayed with 8 bit.
5 — Drum thermistor M check
Thermistor output value is displayed with 8 bit.
6 — Drum thermistor C check
Thermistor output value is displayed with 8 bit.
7 — Drum thermistor K check
Thermistor output value is displayed with 8 bit.
8——
9——
0——
[FULL COLOR]key: OFF, [AUTO COLOR]key: ON, [ENERGY SAVER]key: OFF