Toshiba FC-22 Manual

A SERVICE OF

next previous

January 2000 © TOSHIBA TEC 1 - 79 FC-22 ADJUSTMENT

Note :

1. When winding the wires on the pulleys, take

the following precautions:

· Do not wind the wire on the pulley with

the wire twisted.

· Wind the wire strongly so that all the turns

of the wire are in firm contact with the

surface of the pulley.

· Each time you wind a turn on the pulley,

push it to the preceding turn so that all

the turns are closely wound.

2. When fitting wire holder jigs, take care so

that the turns wound on the pulleys do not

move or unwind.

No gap should exist.

e.g. Front side

<Relationship between wound turns and wire holder jigs>

3-mm dia.

ball terminal

Pulley

Wire holder jigs

Front side

Rear side

Wire holder jig