Filter
Top Products
98
Setting up the Job Log Options
: Job Log Options are available only when the PS3 Scan & HDD Upgrade (GE-1060+GE-1110)
is installed.
In the Job Log options, you can specify whether the GA-1140 should store the jobs which were printed
from the Print queue. These options enable to access the jobs with the job management tools, which
are provided with the HDD option.
You can set up the Job Log options only from TopAccess.
Setting up from TopAccess
1
Accessing the TopAccess for Administrator.
P23 “Accessing TopAccess for Administrator”
2
Accessing the Job Log Setup page.
1. Click on the TopAccess SETUP menu.
2. Click on the Job Log tab.
3
Enter each item explained below and click on
[SETUP].
Enable Printed Queue
Check this option to enable the Printed queue, which creates a storage location on the GA-
1140 disk for recent jobs that were printed from the Print queue. Users with access to the job
management tools can reprint their own jobs from the Printed queue without sending them to
the GA-1140 again. If you checked off this option, jobs are deleted from the GA-1140 disk
immediately after they are printed.