Filter
Top Products
58
4
Check the box for “Enable NDS” and “Enable
Bindery Server 1 (to 8)”. Then enter each item
explained below and click on [SETUP].
• The “Enable Bindery Server 1 (to 8)” option allows
you to set up to 8 bindery servers to be used for
printing. Check the box for this option from 1 to 8 as
you requires and you must enter the values for the
“File Server” and “Bindery Print Server” options where
you check the boxes.
NOTE:
You should also enable the “Enable NDS”
option to use the GA-1140 in bindery mode.
File Server
Enter the name of a file server that the print server and print queues for the GA-1140 are
created.
Bindery Print Server
Enter the name of the print server that you have created for the GA-1140 on the file server.
Password
Enter the password if it has been set to the print server.
5
The message “Reset the Printer Enable
Setting” is displayed on the top of a page.
Perform resetting the GA-1140.
P125 “Resetting the GA-1140”
• The setting changes on the Network options is
applied after resetting the printer. If you want to set
other network options, you can also proceed the
operation for setup before resetting the printer.