Filter
Top Products
133
Troubleshooting
Printer Error: Wait
Wait for the printer to respond.
Set Developer Unit
The developer unit has been removed. Set the developer unit to the copier.
Dispose of Used Toner
Toner bag is full. Clean up the toner bag.
Misfeed in Copier
Paper Jam occurs. Remove the jammed paper in the copier.
Add Toner
Toner is empty. Add toner.
Close the Cover
The Cover is opened. Close the cover.
Finisher not Ready
Wait for the finisher to be ready.
Check Paper in LCF
No paper in the Large Capacity Feeder. Add paper in the Large Capacity Feeder.
Add Paper
No paper in a cassette. Add paper in the cassette.
Wait Warming Up
Wait for the printer to be ready.
Finisher Full: Remove Paper from the tray
Too many papers are on the finisher tray. Remove the outputs from the finisher tray.
Finisher Full: Remove Paper from the saddle tray
Too many papers on the finisher saddle tray. Remove the outputs from the finisher saddle tray.
Stapler not Ready
No staple in the staple cartridge. Add staples to the staple cartridge.
Examine Stapler
Staple Jam occurs. Remove jammed staples from the staple cartridge.