Filter
Top Products
12
About Setup and Administration
The GA-1140 provides following tools to configure the GA-1140 network and printer settings:
Touch Panel Display
You can configure the GA-1140 from the Touch Panel Display on the copier. Since TopAccess, which
is another tool to set up the GA-1140, is enabled only on the TCP/IP network, setup operation from the
Touch Panel Display is useful when you setting up the GA-1140 for the first time, or when the GA-1140
is connected to your computer directly using the printer cable.
TopAccess
You can also configure the GA-1140 network and printer settings from TopAccess, a web-based utility.
TopAccess is functionally superior to setting up from Touch Panel Display in some setup. In addition to
that TopAccess provides the setup options for GA-1140 same as the Touch Panel Display, TopAccess
provides setting options that cannot be set up from the Touch Panel Display.
: You can also configure the GA-1140 network and printer settings from Command WorkStation
which is an optional software for the PS3 Scan & HDD Upgrade (GE-1060+GE-1110). For
further details about Command WorkStation, see
Fiery Utilities Guide
which is included in the
PS3 Scan & HDD Upgrade (GE-1060+GE-1110).
Administrators can perform following GA-1140 setup from the Touch Panel Display and TopAccess:
• Port Setup to specify Ethernet and parallel port settings.
P42 “Setting up the Port Options”
• Protocol Setup to specify the network protocols and print services for the active network systems
that will transmit print jobs to the GA-1140.
P46 “Setting up the Protocols”
• Printer Setup to specify default settings for printing, finishing options, emulation of the printer, PCL
options, and PostScript options.
P68 “Setting up the Printer Setup Options”
• TopAccess Setup to specify system options.
P94 “Setting up the TopAccess Setup Options”