Filter
Top Products
44
4
Perform resetting the GA-1140.
P109 “Resetting the GA-1140”
• The setting changes on the Network options is applied after resetting the printer. If you want to set
other network options, you can also proceed the operation for setup before resetting the printer.
Setting up the Parallel Port Options
In the Parallel Port options, you can specify the time out interval and Ignore “End of File” option.
You can set up the Parallel Port option from Touch Panel Display or TopAccess. There are no
difference between the setup from Touch Panel Display and setup from TopAccess for Ethernet
options.
Setting up from Touch Panel Display
1
Accessing the Setting menu on the Touch Panel Display.
P18 “Accessing Setting Menu”
2
Accessing the Parallel Setup screen.
1. Press [PORT SETUP] on the Setting menu.
2. Press [PARALLEL SETUP] on the Port Setup menu.
3
Modify the options and press [SET].
Time Out
This option determines how long the GA-1140 waits without receiving data from the parallel
port before deciding that the current job is complete. Until the timeout, the GA-1140 cannot
receive new jobs through the parallel port, but it can continue to receive network print jobs.
Ignore EOF
This option specifies that the GA-1140 should ignore end-of-file (EOF) messages in a file. This
option must be set to Yes to print PostScript files in binary format (not ASCII); under normal
circumstances, it should be set to No. When this option is set to Yes, the GA-1140 uses the
parallel port timeout value to determine when the end of the file has been reached.