Filter
Top Products
68
Setting up the Printer Setup Options
Setting up the Printer Default Options
In the Printer Default options, you can specify the default printer settings such as number of copies,
paper size, paper source, finishing, destination, duplex, and orientation. These settings are used for
printing the job which does not include the print setting information. For example, when the print job is
sent from the MS-DOS prompt using the LPR command without specifying the paper size, orientation
and so on, the GA-1140 uses these settings for printing.
You can set up the Printer Default options from Touch Panel Display or TopAccess. There are no
difference between the setup from Touch Panel Display and setup from TopAccess for Ethernet
options.
Setting up from Touch Panel Display
1
Accessing the Setting menu on the Touch Panel Display.
P18 “Accessing Setting Menu”
2
Accessing the Printer Default Setup screen.
1. Press [PRINT DEFAULT] on the Setting menu.
3
Press [COPIES] to set the number of copies.
• The Copies option screen is displayed.