Filter
Top Products
3.4 System Test 3 Tests and Diagnostics
7. “Create DMIINFO TXT (Y/N) ?” is displayed.
Press Y, then the DMI information (text data) is written to the Floppy
disk, etc.
Subtest 10 CPU Temperature
This subtest checks the CPU temperature.
When the subtest starts, the following message appears on the display. Enter
the ambient Celsius temperature.
EXT. TEMP =
When the temperature is entered, test program turns off the screen message.
After 15 minutes, it measures the CPU temperature and judges the test result
(OK or NG) based on the gap between the ambient temperature and the
measured temperature (threshold value).
When any error occurs, an error log is written into “DIAGNOSTIC MENU: 5-
LOG UTILITIES”.
The meaning of “WD” or “RD” of the error log is as follows:
WD : Reference value of CPU temperature rising (hexadecimal form).
RD : Gap between the CPU temperature and the ambient temperature
(hexadecimal form).
Satellite M30-35 Maintenance Manual (960-455) 3-11