4 Replacement Procedures 4.10 Switch cover ASSY/Switch membrane
2. Pull up the insulator.
3. Disconnect the switch membrane cable from the connector PJ7001 on the system
board.
4. Remove the following screws fixing the switch membrane.
• M2.5×4B FLAT HEAD screw ×2
5. Remove the switch membrane by lifting up the left side of the switch membrane.
Switch membrane
M2.5
×
4B FLAT HEAD
Insulator
PJ7001
Figure 4-14 Removing the switch membrane
4-30 Satellite M30-35 Maintenance Manual (960-455)