Toshiba M30-35 Personal Computer User Manual


 
1.2 System Unit Block Diagram 1 Hardware Overview
Memory
Two memory slots are provided. Expansion up to 2GB (2,048MB) is available.
Supports DDR CL2/2.5
Supports PC2700
256MB: 256Mbit (16M × 16bit) chips × 8
512MB: 512Mbit (32M × 8bit) chips × 16
512Mbit (32M × 16bit) chips × 8
1GB: 512Mbit (64M × 8 bit) chips × 16
200 pin, SO Dual In-line Memory Modules (SO-DIMM)
2.5 volt operation
Intel Odem+ (North Bridge)
One Intel RG82P4300M is used.
Features:
Banias Processor System Bus Support
DRAM Controller supporting DDR333/DDR266/DDR200, 1GB max
Accelerated Graphics Port Interface: adheres to AGP2.0, AGP×4 mode
Hub Link Interface
– 593-ball 37.5×37.5 mm FC-BGA package
Intel ICH4-M (South Bridge)
One Intel 82801LAM is used.
This gate array has the following features:
Hub Link Interface
PCI Rev2.2 Interface (6 PCI REQ/GNT Pairs)
BusMaster IDE Controller (Ultra ATA 100/66/33)
USB 1.1/2.0 Controller 6 Prots (EHCI: Enhanced Host Controller)
I/O APIC (ACPI 1.06)
– SMBus2.0 Controller
FWH Interface (BIOS)
LPC Interface (EC/KBC, Super I/O)
– IRQ Controller
Serial Interrupt Controller
Power Management Controller
Deeper Sleep (C4) Support
– Suspend/Resume Control
AC'97 2.2 Interface
– Internal RTC
Internal LAN Controller (WfM2.0)
– 421-ball 31×31mm BGA Package
Satellite M30-35 Maintenance Manual (960-455) 1-9