Filter
Top Products
4 Replacement Procedures 4.23 RGB board/Power board
4.23 RGB board/Power board
Removing the RGB board/Power board
To remove the RGB board/Power board, follow the steps below and refer to figures 4-35 to
4-37.
1. Remove the following screws and battery plate.
• M2.5×6 Tapping screw ×3
M2.5
×
6 Tapping
Battery plate
Figure 4-35 Removing the battery plate
2. Remove the following screw and RGB board.
• M2.5×6 Tapping screw ×1
3. Disconnect the RGB cable from the connector CN3 on the RGB board.
M2.5
×
6 Tapping
RGB board
RGB cable
Figure 4-36 Removing the RGB board
4-58 Satellite M30-35 Maintenance Manual (960-455)