Filter
Top Products
4.16 Sound Board/Touch Pad holder 4 Replacement Procedures
4.16.2 Touch Pad holder
Removing the Touch Pad holder
To remove the touch pad holder, follow the steps below and refer to figures 4-24.
1. Disconnect the sound board I/F cable from the connector PJ7002 on the system
board.
2. Remove the touch pad holder from the system board.
Sound board
I/F cable
T
ouch pad holde
r
Figure 4-24 Removing the touch pad holder
Installing the Touch Pad holder
To install the touch pad holder, follow the steps below and refer to figures 4-24.
1. Install the touch pad holder on the system board.
2. Connect the sound board I/F cable to the connector PJ7002 on the system board.
Satellite M30-35 Maintenance Manual (960-455) 4-45