Filter
Top Products
4 Replacement Procedures 4.23 RGB board/Power board
Installing the RGB board/Power board
To install the RGB board/Power board, follow the steps below and refer to figures 4-35 to 4-
37.
1. Connect the battery cable to the connector CN4 on the power board.
2. Connect the wireless LAN cables to the connectors CN6 (white) and CN8 (black) on
the power board.
3. Place the power board and secure it with the following screws.
• M2.5×6 Tapping screw ×2
4. Connect the RGB cable to the connector CN3 on the RGB board.
5. Place the RGB board and secure it with the following screws.
• M2.5×6 Tapping screw ×1
6. Place the battery plate and secure it with the following screws.
• M2.5×6 Tapping screw ×3
4-60 Satellite M30-35 Maintenance Manual (960-455)