Filter
Top Products
4 Replacement Procedures 4.15 RTC Battery
Removing the RTC Battery
To remove the RTC battery, follow the steps below and refer to figure 4-22.
1. Peel off the insulator.
2. Disconnect the RTC battery cable from the connector PJ8490 on the system board.
3. Remove the RTC battery.
Insulator
RTC battery
RTC battery cable
Insulator
Figure 4-22 Removing the RTC battery
Installing the RTC Battery
To install the RTC battery, follow the steps below and refer to figure 4-22.
1. Place the RTC battery into the slot.
2. Pass the RTC battery cable through the battery guide and connect the RTC battery
cable to the connector PJ8490 on the system board.
3. Fix the RTC battery with the insulator.
4-42 Satellite M30-35 Maintenance Manual (960-455)