Filter
Top Products
4.24 Display Mask 4 Replacement Procedures
4.24 Display Mask
Removing the Display Mask
To remove the display mask, follow the steps below and refer to figures 4-38.
1. Remove the two mask seals at the lower part of the display mask.
2. Remove the four rubber masks at the top of the display mask.
3. Remove the following screws securing the display mask.
• M2.5×6B FLAT HEAD screw ×2
• M2×4B S-FLAT HEAD screw ×3
4. Release the latches on the display mask and remove the display mask.
M2.5
×
6B FLAT HEAD
Mask seals
M2
×
4B S-FLAT HEAD
Rubber masks
Mask seals
M2.5
×
6B FLAT HEAD
Figure 4-38 Removing the display mask
Satellite M30-35 Maintenance Manual (960-455) 4-61