Filter
Top Products
3.26 Sound/LAN/Modem Test Program 3 Tests and Diagnostics
Subtest 02 LAN
This subtest checks the operation of mini-PCI I/F by the loopback in the chip.
Select 3 to execute and press Enter. The following message will appear:
[LAN transmit & receive test !]
COMPLETED Repeat count = 00000
Error count = 00000
LOOPBACK TEST
100Mbps Auto-negotiation TxRx Test
Destination Address = xxxxxxxxxxxx
Source Address = xxxxxxxxxxxx
** 100Base-TX Full-Duplex **
< TRANSMIT >
< RECEIVE >
NOTE: The menu displayed by your computer may be slightly different from the one
shown above.
Check that the message “OK” appears.
Subtest 03 Modem
For this subtest, connect the modem PCB and RJ11 connector with a harness.
Use the dedicated “FAT-MODE inspection device (product code: QE2000P01
made by Nitto Denki Seisakusyo)” for the tests.
Select 4 to execute and press Enter. The following message will appear:
[Modem loopback test !]
ICHx MDC Test Program with Modem Sound (Line Test)
Version X.X
* Scorpio Modem Initialize :OK
* Digital Loopback Test :OK
* Modem Sound Test :(Operator’s Check!!)
Satellite M30-35 Maintenance Manual (960-455) 3-55