Filter
Top Products
4 Replacement Procedures 4.5 HDD
3. Push the tab of the HDD pack to the direction of the arrow and remove the HDD
pack. Be careful not to damage the connector.
NOTE: The following steps describe how to disassemble the HDD pack; however, do not
disassemble if the HDD is working properly.
4. Remove the following screws.
• M3×4S FLAT HEAD screw ×4
5. Remove the HDD bracket.
CAUTION: Do not apply pressure to the top or bottom of the HDD.
6. Remove the HDD from the aluminum laminate.
HDD
HDD bracket
M3
×
4S FLAT HEAD
M3
×
4S FLAT HEAD
Aluminum laminate
Figure 4-5 Removing the HDD bracket and HDD
4-14 Satellite M30-35 Maintenance Manual (960-455)