Filter
Top Products
Appendices Appendix J SETUP
To access the SETUP display, power on the computer and while “TOSHIBA” logo is
displayed, press [F2]. Then, the main menu similar to the one blow appears.
There are five tabs (Main, Advanced, Security, Boot and Exit) in the SETUP menu. To move
between the tabs, press ← or →. Each option is displayed on the menu by selecting a tab.
“Item Specific Help” on the right of the menu describes each option.
Figure J-1 Main menu
SETUP Options
The SETUP screen is divided into functionally related groups. This section describes each
group and its options.
Main
1. Total Memory
This option displays the total amount of memory installed and is automatically
calculated by the computer. You cannot change this value.
2. System Date
This option is used to set the date of the computer. To change the value, press [F5] or
[F6] and press [Enter] to select the value.
System Date Sets the date.
3. System Time
This option is used to set the time of the computer. To change the value, press [F5] or
[F6] and press [Enter] to select the value.
System Time Sets the time.
4. BIOS Ver.
This option displays the BIOS version of the computer. You cannot change this value.
J-2 Satellite M30-35 Maintenance Manual (960-455)