Filter
Top Products
3.15 CD-ROM/DVD-ROM Test 3 Tests and Diagnostics
3.15 CD-ROM/DVD-ROM Test
To execute the CD-ROM/DVD test, select 13 from the DIAGNOSTICS TEST MENU, press
Enter and follow the directions on the screen.
NOTE: For the subtest 01, 02 and 03, use the TOSHIBA CD-ROM TEST DISK
(ZA1217P01/P000204190) for CD-ROM and DVD-ROM TEST DISK TSD-1 for
DVD-ROM. For the subtest 04, use a music CD on the market. For the subtest 05,
use a CD-RW on the market.
Subtest 01 Sequential read
This subtest is a sequential reading of one-block units (2K bytes) of all the
logical addresses.
Subtest 02 Read specified address
This subtest reads one-block data from a specified address.
Subtest 03 Random address/data
This subtest reads one-block data and multi-block data from random addresses
200 times.
Subtest 04 Playback Music (CD only)
This subtest reads track data from a specified track and plays the sound.
CAUTION: When the CD-ROM test is executed, “ALL DEVICE” must be selected in the
“SET-UP” of the BIOS SETUP. If the “ALL DEVICE” is not selected, music
can not be played.
Subtest 05 RW 1Point W/R/C
This subtest writes, reads and compares data at one point on a CD/RW media.
Satellite M30-35 Maintenance Manual (960-455) 3-31