Filter
Top Products
3.26 Sound/LAN/Modem Test Program 3 Tests and Diagnostics
3.26 Sound/LAN/Modem Test Program
This section describes how to perform the Sound/LAN/Modem test with the test program.
Insert the Test program disk in the floppy disk drive and turn on the power. The following
message will appear:
####################################################################
######### XXXXXX DIAGNOSTICS PROGRAM (SOUND/LAN/MODEM TEST)#####
####################################################################
* *
* 1 ............ ( Microphoned recording & play ) *
* *
* 2 ............ ( LAN ) *
* *
* 3 ............ ( Modem ) *
********************************************************************
.... Press test number[1-3] ?
Press the number you want to test and press Enter.
NOTE: The system is capable of producing high volume sound, so when you use the
headphones be careful to set the volume low and adjust it as necessary. Using the
headphones at full volume could damage your ears.
To execute a subtest continuously, select the test number and press Enter. To exit the
Sound/LAN/Modem test, remove the test program disk from the USB FDD and turn off the
power.
Satellite M30-35 Maintenance Manual (960-455) 3-53