Filter
Top Products
4 Replacement Procedures 4.20 Speaker
2. Remove the following screw and cable holder.
• M2.5×4B FLAT HEAD screw ×1
M2.5
×
4B FLAT HEAD
Cable holder
Figure 4-32 Removing the cable holder
3. Remove both the speakers.
Installing the Speaker
To install the speaker, follow the steps below and refer to figures 4-31 to 4-32.
1. Set both the speakers.
2. Install the cable holder and secure it with the following screw.
• M2.5×4B FLAT HEAD screw ×1
3. Secure the following screws and stick the insulator to fix the speakers.
• M2.5×6B FLAT HEAD screw ×4
• M2.5×4B FLAT HEAD screw ×1 (upper left side)
4-54 Satellite M30-35 Maintenance Manual (960-455)