Filter
Top Products
4.7 Memory module/ Modem Daughter Card 4 Replacement Procedures
4.7.2 Modem Daughter Card
Removing the Modem Daughter Card
To remove the modem daughter card, follow the steps below and refer to figure 4-9.
1. Remove the following screws securing the modem daughter card.
• M2×4B BIND screw ×2
2. Lift up the modem daughter card to disconnect it from the connector PJ3000 on the
system board.
4. Disconnect the modem cable from CN1 on the modem daughter card.
PJ3000
MDC
Modem cable
M2
×
4B BIND
Figure 4-9 Removing the modem daughter card
Satellite M30-35 Maintenance Manual (960-455) 4-21