Filter
Top Products
4 Replacement Procedures 4.28 LCD cable/Wireless LAN Antenna/Hinge
4.28 LCD cable/Wireless LAN Antenna/Hinge
Removing the LCD cable/Wireless LAN Antenna
To remove the LCD cable/wireless LAN antenna, follow the steps below and refer to figures
4-43 to 4-49.
1. Remove the following screw and LCD cable holder on the back.
• M2.5×5B FLAT HEAD screw ×1
M2.5
×
5B FLAT HEAD
LCD cable holder
Figure 4-43 Removing the LCD cable holder
2. Peel the insulator and remove the following screw and cable holder on the front.
• M2.5×4B FLAT HEAD screw ×1
M2.5
×
4B FLAT HEAD
Cable holder
Insulator
Figure 4-44 Removing the cable holder
4-70 Satellite M30-35 Maintenance Manual (960-455)