Filter
Top Products
Appendices Appendix J SETUP
J-4 Satellite M30-35 Maintenance Manual (960-455)
9. Parallel Port Mode
This option sets the mode for the parallel port using options.
[ECP] Sets the port type to Extended Capabilities Port (ECP). For
most printers, the port should be set to “ECP.” (Default)
[Bi-derectional] This setting should be used with some other parallel devices.
Security
1. Power On Password
To set a new user password, press [Enter] and enter the new password twice.
[Not Registered] The password has not been registered.
[Registered] The password has been registered.
Boot
This option displays boot sequence of devices of the computer.
Hard Drive mainly for HDD
Removable Devices mainly for FDD
CD/DVD-ROM Drives mainly for CD/DVD-ROM
Network Boot mainly for LAN
Exit
1. Exit Saving changes
Exit System Setup and save your changes to CMOS.
2. Exit Discarding Changes
Exit utility without saving Setup changes data to CMOS.
3. Load Setup Defaults
Load default values for all Setup items.
4. Discard Changes
Load previous values from CMOS for all Setup Items.
5. Save Changes
Save Setup data to CMOS.